Pumps - 01539 735572 / Washers - 01931 712413
d

D

D

PLEASE NOTE NOT SUITABLE FOR PONDS.

These pumps are designed for lifting clean or dirty water

THEY ARE PARTICULARLY SUITED FOR HEAVY DUTY DOMESTIC AND PROFESSIONAL USE:

EMPTYING FLOODED BASEMENTS, GARAGES etc.
DRAINAGE AND OTHER INDUSTRIAL APPLICATIONS
DISPOSAL OF NON- SEWAGE EFFLUENT WATER FROM SEPTIC TANKS.

Category:

Product Description

D

PLEASE NOTE NOT SUITABLE FOR PONDS.

Flow rate up to 400 L/min (24 m³/hr)
Dynamic head up to 27 m

OPERATING LIMITS

Maximum operating depth 5m below water level
Fluid temperature up to + 40 °C
Maximum passage for suspended solids Ø 10mm
Maximum emptying level 15mm from the bottom
PUMP INSTALLATION AND APPLICATIONS

These pumps are designed for lifting clean or dirty water

THEY ARE PARTICULARLY SUITED FOR HEAVY DUTY DOMESTIC AND PROFESSIONAL USE:

EMPTYING FLOODED BASEMENTS, GARAGES etc.
DRAINAGE AND OTHER INDUSTRIAL APPLICATIONS
DISPOSAL OF NON- SEWAGE EFFLUENT WATER FROM SEPTIC TANKS.

These pumps are easy to install and dependable when used in fixed automatic installations.

A purpose built sump is recommended for fixed installations (minimum dimensions 500 x 500 x 500 mm) to provide total drainage and allow correct operation of the float switch. The adjustable float switch is supplied as standard on single phase models and automatically starts the pump when the fluid reaches a preset level, stopping it once the fluid has been emptied.

Installing a suitable non- return valve on the delivery pipe prevents reverse flow when the pump stops.

STRUCTURAL CHARACTERISTICS

Cast iron PUMP BODY, with UNI ISO 228/1 1½ inch gas threaded discharge port
AISI 304 stainless steel MOTOR COVER.
AISI 304 stainless steel SUCTION STRAINER providing the support base for the pump.
General Electric Noryl GFN2V technopolymer open IMPELLER
AISI 430F stainless steel MOTOR SHAFT.
DOUBLE SEAL SYSTEM silicon carbide/silicon carbide on the pump side and lip seal on the motor side with barrier oil chamber (bio-degradable) to lubricate and cool the sealing surfaces in the absence of water.
Sealed induction MOTOR: with double impregnated class F winding (ensuring extended motor life and wide range of use), designed for continuous duty, even with the pump partially submerged (min. 190mm). A thermal cutout device (motor protector) is incorporated in single phase models.

PROTECTION IP 68.
Neoprene “HO7 RN-F” submersible SUPPLY CABLE (10 metres standard).
CONSTRUCTION AND SAFETY STANDARDS in compliance with EN 60 335 -1, CEI 61-150), EN 60034-1), (IEC 34-1, CEI 2-3)

d1graph

d2graph 2

Click here D PDF

 

Reviews

There are no reviews yet.

Be the first to review “D”